T4-806 belt chip removal conveyor with sealed trough
Characteristics
T4-806 chip removal conveyor with sealed housing trough: every conveyor undergoes a hydraulic test – the trough is filled with water to 200 mm, no leaks allowed. Belt with 63 mm pitch, lift angle 60°, discharge height 1605 mm, discharge section on a separate support frame.
- Description
- Questionnaire
Specifications
| Part number (design documentation code) | T4-806 |
| Type | belt (hinged-plate belt), belt pitch 63 mm |
| Overall dimensions (L×W×H) | 5520 × 460 × 3104 mm |
| Receiving section length | 3454 mm |
| Lift angle | 60° |
| Discharge height | 1605 mm |
| Housing trough | sealed, hydraulically tested |
| Weight | 936,5 kg |
Equipment
- body with sealed trough
- belt with 63 mm pitch, sprockets t=63, return rollers and guides
- worm gear motor
- jam protection limit switch
- junction box with emergency button
- discharge section support frame
- supports – 4 pcs.
Design features
- Sheet steel body, polymer powder coating.
- Belt jam protection: a limit switch stops the drive, and there is an emergency stop button.
- Drive and control cabinet on the right or left, as ordered.
- Made to our own design documentation – we will repeat it or adapt it to your machine and dimensions.
Made to order. To select equipment for your machine, fill in the questionnaire (the "Questionnaire" tab) or send a request – an engineer will clarify the parameters.
See also
KSU.01 belt chip conveyor
KSU.15 belt chip conveyor
KSU.P.01 belt chip conveyor
KSU.BS.01 belt chip conveyor
KSU.04 belt chip conveyor
KSU.05 scraper chip conveyor with polyurethane scrapers
KSU.06 scraper chip conveyor with polyurethane scrapers
KSU.BS.02 belt chip conveyor
KSU.BS.03 belt chip conveyor
KSU.07 belt chip conveyor
KSU.08 belt chip conveyor
KSU.P.02 belt chip conveyor
KSU.09 belt chip conveyor
KSU.10 belt chip conveyor
KSU.11 belt chip conveyor
KSU.12 belt chip conveyor
KSU.BS.04 belt chip conveyor
KSU.BS.05 belt chip conveyor
KSU.13 belt chip conveyor
KSU.14 belt chip conveyor