KSU.30 belt chip conveyor with receiving hopper
Characteristics
KSU.30 belt chip conveyor with a receiving hopper on the horizontal section: chips do not spill past the belt. Lift 45°, discharge at a height of 1400 mm.
- Description
- Questionnaire
Specifications
| Part number (design documentation code) | KSU.30 |
| Type | belt (hinged-plate belt) |
| Overall dimensions (L×W×H) | 3110 × 663 × 1944 mm |
| Receiving hopper length | 991 mm |
| Lift angle | 45° |
| Discharge height | 1400 mm |
| Belt speed | 5,0–5,5 m/min |
| Drive | NMRV 063 gear motor |
| Weight | 223,4 kg |
| Coating | polymer, RAL 6037 |
Equipment
- body with hinged-plate belt
- receiving hopper
- NMRV 063 gear motor
- jam protection limit switch
- junction box with emergency button
- vibration-isolating supports – 4 pcs.
Design features
- Sheet steel body, polymer powder coating.
- Belt jam protection: a limit switch stops the drive, and there is an emergency stop button.
- Drive – worm gear motor; the drive and control cabinet can be placed on the right or left, as ordered.
- The conveyor is made to our own design documentation – we will repeat it or adapt it to your machine and dimensions.
Made to order. To select a conveyor for your machine, fill in the questionnaire (the "Questionnaire" tab) or send a request – an engineer will clarify the parameters.
See also
KSU.01 belt chip conveyor
KSU.15 belt chip conveyor
KSU.P.01 belt chip conveyor
KSU.BS.01 belt chip conveyor
KSU.04 belt chip conveyor
KSU.05 scraper chip conveyor with polyurethane scrapers
KSU.06 scraper chip conveyor with polyurethane scrapers
KSU.BS.02 belt chip conveyor
KSU.BS.03 belt chip conveyor
KSU.07 belt chip conveyor
KSU.08 belt chip conveyor
KSU.P.02 belt chip conveyor
KSU.09 belt chip conveyor
KSU.10 belt chip conveyor
KSU.11 belt chip conveyor
KSU.12 belt chip conveyor
KSU.BS.04 belt chip conveyor
KSU.BS.05 belt chip conveyor
KSU.13 belt chip conveyor
KSU.14 belt chip conveyor