L01 anchor
In stock
- Description
- Sizes and prices
Can be made from the following steel grades:
- GOST 12Kh18N10T, 08Kh18N10
- AISI 304, 310S, 321, 309S, 201, 1.4835
A special bending technology that reduces the number of bending marks is used for round anchors for monolithic lining.
Stress in the steel structure is reduced, which prevents micro-cracks.
Sizes and part numbers: L01 anchor
We make L01 anchors to order. Available sizes (54 pcs) are in the table below. If the size you need is not listed, we will make it to your drawing – ask a manager.
| № | Part number / size |
|---|---|
| 1 | Anchor L01 8-200(50)-310 |
| 2 | Anchor L01 8-220(50)-310 |
| 3 | Anchor L01 8-245(50)-310 |
| 4 | Anchor L01-12-200-310SK |
| 5 | Anchor L01-12-240-310SK |
| 6 | Anchor L01-12-270-310SK |
| 7 | Anchor L01-12-280-310K |
| 8 | Anchor L01-12-310-310K |
| 9 | Anchor L01-12-370-310SK |
| 10 | Anchor L01-12-380-310K |
| 11 | Anchor L01-12-450-310SK |
| 12 | Anchor L01-12-480-310K |
| 13 | Anchor L01-12-530-310K |
| 14 | Anchor L01-12-550-310K |
| 15 | Anchor L01-12-580-310K |
| 16 | Anchor L01-12-600-310K |
| 17 | Anchor L01-8-150-50-321K |
| 18 | Anchor L01-8-175-310SK |
| 19 | Anchor L01-8-225-75-310K |
| 20 | Anchor L01-8-280-75-310K |
| 21 | Anchor L01-8-280-75-321K |
| 22 | Anchor L01.10-150-60-310K |
| 23 | Anchor L01.10-178-90-304K |
| 24 | Anchor L01.10-226-115-304K |
| 25 | Anchor L01.10-283-155-304K |
| 26 | Anchor L01.10-290-105-310K |
| 27 | Anchor L01.10-325-310K |
| 28 | Anchor L01.10-331-185-304K |
| 29 | Anchor L01.10-331-185-310K |
| 30 | Anchor L01.10-400-200-310K |
| 31 | Anchor L01.10-400-230-310K |
| 32 | Anchor L01.12-240-310SK |
| 33 | Anchor L01.12-500-200-310K |
| 34 | Anchor L01.12-570-385-310K |
| 35 | Anchor L01.6-120-310K |
| 36 | Anchor L01.6-200-50-310K |
| 37 | Anchor L01.6-240-150-310 |
| 38 | Anchor L01.6-270-310K without heel, without washer |
| 39 | Anchor L01.6-340-100-310K |
| 40 | Anchor L01.6-450-40-310K |
| 41 | Anchor L01.8-160-40-310K |
| 42 | Anchor L01.8-175-310SK |
| 43 | Anchor L01.8-200-40-310K |
| 44 | Anchor L01.8-200-50-310K |
| 45 | Anchor L01.8-200-60-310K |
| 46 | Anchor L01.8-200-75-310K |
| 47 | Anchor L01.8-220-50-310K |
| 48 | Anchor L01.8-230-40-310K |
| 49 | Anchor L01.8-245-50-310K |
| 50 | Anchor L01.8-250-40-310K |
| 51 | Anchor L01.8-300-100-310K |
| 52 | Anchor L01.8-350-310K with washer 70×38 St.3 |
| 53 | Anchor L01.8-400-310K with washer 70×38 St.3 |
| 54 | Anchor L 8-540 AISI 310 |
We make the L01 anchor with diameters of 5, 6, 8, 10, 12 mm and lengths from 75 to 600 mm from heat-resistant steels 08Kh18N10T (AISI 304), 20Kh23N18 (AISI 310), 12Kh18N10T (AISI 321). The table shows versions we have already shipped; any other size is made to order to your drawing.
| Diameter, mm | Length, mm | Steel grade | Price per piece |
|---|---|---|---|
| 5 | 120, 180, 200 | 08Kh18N10T (AISI 304), 20Kh23N18 (AISI 310) | from RUB 90 |
| 6 | 75, 80, 90 … 380, 420 (24 sizes) | 20Kh23N18 (AISI 310), 12Kh18N10T (AISI 321) | from RUB 143 |
| 8 | 100, 110, 130 … 480, 600 (17 sizes) | 20Kh23N18 (AISI 310), 12Kh18N10T (AISI 321) | from RUB 186 |
| 10 | 150, 170, 178 … 445, 575 (24 sizes) | 08Kh18N10T (AISI 304), 12Kh18N10T (AISI 321), 20Kh23N18 (AISI 310) | from RUB 188 |
| 12 | 270, 340, 350, 400, 430, 500 | 20Kh23N18 (AISI 310) | from RUB 1 342 |
The price is per piece including VAT and is valid at the time of publication. For an offer for your lining, send a request.
