SPHERE CABINET HMC-500X800X500-1-IP54
Characteristics
Diagonal opening in the upper part of the D-box provides easy access to the placed devices and equipment.
We manufacture D-boxes to order according to the required dimensions. To determine the internal dimensions:
- if the insulation is based on foam rubber or polyethylene foam, the wall and door thickness of 25 mm must be assumed;
- if the D-box enclosure is split on a pipe, the required diameter of the pipe hole or the size of the required pipe diameter must be specified when ordering.
- Description
- Complete set
| Overall dimensions (height x width x depth), mm | 500х800х500 |
| Type | Insulated outdoor cabinet D-box |
| Enclosure material | General-purpose steel |
| The thermal insulation | material is foam rubber (thickness 19mm) |
| Degree of protection | IP54 |
| Type of heater | Explosion proof with thermostat |
- General-purpose steel body. The thickness of metal is 1-4mm;
- There is a hole 126mm in the bottom of the enclosure;
- Mounting plate size 400h700mm -1pc;
- Latch-lock (allows to regulate the degree of gasket sealing) - 2 pcs;
- Gas elevators for raising and fixing the D-box cover - 2 pcs;
- Reliable fittings (hinges, locks, seal on the connector line, U-shaped seal on the observation window);
- Comfortable plastic handle on the cabinet door - 1pc;
- Foamed rubber-based thermal insulation (thickness 19mm);
- Earthing wire between cabinet and door - 1pc;
- Double-glazed unit 200x200x20 - 1 pc;
- Heater explosion-proof OSHA-R-2 200 W with built-in thermostat - 1 pc;
- Explosion-proof aluminum connection box - 2 pcs;
- In the lower enclosure on the sides are holes for cable entry plastic PG21 (13-18 mm) - 4 pieces at each side;
- Z-shaped profile for mounting the heater and junction boxes - 2 pcs;
- Polymer-powder coating according to RAL-catalogue.
- Packaging: bubble wrap + cardboard + wooden crate
